BEFORE USING THE NETWORK SCANNER

Overview

To use the machine as a network scanner, you must store sender information, configure server settings, store destinations in the address book, and perform other required operations.

Making sure the main power switch is in the "" position

When the main power indicator is lit up, the main power switch is in the "" position. If the main power indicator is not lit up, turn the main power switch to the "" position and press the [POWER] button on the operation panel.

Checking the date and time

Verify that the correct date and time are set in the machine.
To set the date and time of the machine:
In "Setting mode", select [System Settings][Default Settings][Clock Adjust].
If [Disabling of Clock Adjustment] has been enabled, the date and time cannot be modified. In this case, select [System Settings] in "Setting mode (administrator)" and select [Operation Settings] to disable the [Disabling of Clock Adjustment] setting.

Storing destination addresses for each scan mode in the address book

It is convenient to store addresses in the address book before using Image Send mode.
For how to use the address books and how to store addresses, see the following item.
With Scan to E-mail and Scan to Network Folder, you can also directly enter your desired address.
Back to top