OUTPUT SETTINGS
Overview
Configure the output settings for copies using Sort, Group, Offset, Separator Page, Staple, Punch, or Fold. Also specify the output destination of copies.
Output Tray
Specify the destination to output copies.
If a finisher (100-sheet stapling) or saddle finisher (100-sheet stapling) is installed, you can select [Offset Tray] or [Middle Tray].
If a finisher (50-sheet stapling) or saddle finisher (50-sheet stapling) is installed, you can select [Offset Tray] or [Top Tray].
If a high capacity stacker is installed, you can select [Top Tray] or [Stacker Tray].
If a finisher (100-sheet stapling) or saddle finisher (100-sheet stapling) is installed, you can select [Offset Tray] or [Middle Tray].
If a finisher (50-sheet stapling) or saddle finisher (50-sheet stapling) is installed, you can select [Offset Tray] or [Top Tray].
If a high capacity stacker is installed, you can select [Top Tray] or [Stacker Tray].
Offset
This function outputs copies while shifting them set by set. Setting the checkbox to 
enables the offset function, and setting it to 
disables the function.
enables the offset function, and setting it to disables the function.
This function is available when a finisher, saddle finisher, or high capacity stacker is installed and [Offset Tray] or [Stacker Tray] is selected as the output tray.
Selecting the staple function clears the Offset checkmark automatically.Separator Page
This function inserts separator pages for every specified number of copies or for every job before they are output.
The separator page function is available only when the finisher, saddle finisher or high capacity stacker is installed. Sort/Group
Select the sorting method when copying the scanned original.
"Sort" sorts the scanned original on a set basis, and outputs them. "Group" sorts the scanned original on a page basis, and outputs them.
"Sort" sorts the scanned original on a set basis, and outputs them. "Group" sorts the scanned original on a page basis, and outputs them.
Staple
Each set of copies can be stapled, or the sheets can be folded at the center and stapled.
- The staple function is available only when the finisher or saddle finisher is installed.
- The saddle stitch function is available only when the saddle finisher is installed.
Fold
Copies can be folded and output.
The fold function is available only when the saddle finisher or folding unit is installed. Punch
This function punches copies and outputs them.
The punch function is available only when the punch module is installed.