CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS (ORIGINAL COUNT)

Overview

• The count result is displayed with the number of scanned original sheets, not the number of scanned original pages. For example, when a 2-sided original is transmitted, the number "1" will appear to indicate that one original sheet is transmitted, not "2" to indicate the front-side page and the reverse side page.
• The setting should be enabled separately for each mode for broadcasting.

Operation

1. 

   Placing Originals into the Automatic Document Feeder

   • AUTOMATIC DOCUMENT FEEDER
2. 

   Specify the destination

   • SPECIFYING A DESTINATION USING THE SEARCH NUMBER
   • ENTER A DESTINATION MANUALLY
   • SPECIFYING A DESTINATION FROM THE GLOBAL ADDRESS BOOK
   • SPECIFYING A DESTINATION FROM TRANSMISSION LOG
3. 

   Tap the [Others] key, and tap the [Original Count] key

   A checkmark appears on the icon.
   After the settings are completed, tap the [Back] key.

   

   

   To cancel the original count setting:

   Tap the [Original Count] key to clear the checkmark.
4. 

   Tap the [Start] key to start scanning of the original
5. 

   When scanning is completed, check the number of original sheets

   

6. 

   Tap the [OK] key to start transmission

   

   If the displayed number of original sheets is different from the actual number of sheets:

   Tap the [Cancel] key and then tap the [OK] key in the message screen to clear all scanned data. Scan settings and destination settings will not be cleared. Insert the original sheets in the document feeder tray again and tap the [Start] key to re-scan.