SPECIFYING THE SEND SIZE OF THE IMAGE

Overview

Tap this key to specify the send size as a paper size.
For example, if the scan size is 8-1/2" × 11" (A4) and the send size is 5-1/2" × 8-1/2" (B5), the image will be reduced before transmission.

    The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by numeric values.

Operation

  1. Tap the [Original] key

  2. Tap the "Send Size" key

  3. Tap the appropriate paper size key

    After the settings are completed, tap .

    Depending on the paper size specified for the "Scan Size", it may not be possible to select some sizes for the "Send Size".

  4. Tap the "Image Orientation" key with the same orientation as the original image

    If this setting is not correct, a suitable image may not be transmitted.
    After the settings are completed, tap .

    The ratio used for reduction or enlargement of the original will appear between the "Scan Size" and the "Send Size".
    To configure the default setting of image orientation, select [System Settings] in "Setting mode (administretor)" → [Image Send Settings] → [Operation Settings] → [Default Settings] → [Image Orientation].
Back to top