SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE

Overview

When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan size.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only.

Operation

  1. Tap the [Original] key

  2. Tap the "Scan Size" key

  3. Tap the appropriate paper size key

    To specify an AB paper size, tap the [AB] tab, and then tap the appropriate paper size key.
    After the settings are completed, tap .

    If you are sending a long original, tap the [Long Size] key.
    Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 39-3/8" (1,000 mm) (the maximum height is 11-5/8" (297 mm)).
Back to top